Instrument Panel Center Bezel - Removal

REMOVAL
1. Disconnect and isolate the battery negative cable.

2. Insert the trim stick (special tool #C-4755) or equivalent between access cover and center bezel gently pry outward.

3. Carefully pry the access cover from the instrument panel (Figure 1).

4. Remove the two center bezel attaching screws.

5. Using a trim stick or equivalent, gently pry out on the edge of the instrument panel center bezel and pull outward.

6. Disconnect the wire connectors to the accessory switches and HVAC control.

7. Remove the instrument panel center bezel from the vehicle.






Figure 1 INSTRUMENT PANEL CENTER BEZEL