Power Windows

B210E-BATTERY VOLTAGE HIGH

For a complete wiring diagram Consult Diagrams/Electrical

- When Monitored:
Whenever the battery is connected.

- Set Condition:
When the module senses battery voltage above 16.0 volts, this code will set.





Diagnostic Test

1. DTC PRESENT
With the scan tool, record and erase DTC's.
Cycle the ignition switch from On to Off.
Start the engine.
Run the engine at approximately 1500 RPM for 1 minute.
With the scan tool, read DTCs.
Does the scan tool display B210E-BATTERY VOLTAGE HIGH?

Yes

- Check the charging system.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test

No

- The conditions that caused this code to set are not present at this time. Check the charging system.
- Perform BODY VERIFICATION TEST - VER 1.Body Verification Test