B1BBD

B1BBD-OCM CURRENT CONFIGURATION TABLE UNPROGRAMMED

For a complete wiring diagram Consult Diagrams/Electrical.

- When Monitored:
If the Configuration Table is not programmed at the supplier or when the checksum is invalid.

- Set Condition:
This DTC will set if the module was received unprogrammed from the supplier, the vehicle line was not identified correctly or if the flash procedure was not completed successfully





Diagnostic Test

1. MODULE CONFIGURATION
Does the scan tool display B1BBD-OCM CURRENT CONFIGURATION TABLE UNPROGRAMMED?

Yes

Perform the B1BA7-OCS VERIFICATION REQUIRED diagnostic procedure.OCS Verification Test

No

- Replace the Occupant Classification Module.

WARNING: If the Occupant Restraint Controller (ORC) is dropped at any time, it must be replaced. Failure to take the proper precautions can result in accidental airbag deployment and serious or fatal injury.

- With the scan tool, perform *OCCUPANT CLASSIFICATION MODULE SYSTEM VERIFICATION TEST.Occupant Classification Module (OCM) System Verification Test