B2324

B2324-HEADLAMP WASHER MOTOR CONTROL CIRCUIT HIGH

For a complete wiring diagram Consult Diagrams/Electrical.

- When Monitored:
- With the ignition on.
- Set Condition:
- When the FCM detects a short/HIGH condition.





Diagnostic Test

1. HEADLAMP WASHER RELAY
Turn the ignition off.
Replace the Rear Wiper relay with a known good relay.
With the Scan Tool, clear all FCM DTC's.
Turn the Rear Wipers ON then OFF.
With the Scan Tool, read the FCM DTC's.
Does the Scan Tool read: B2324-REAR WIPER MOTOR CONTROL CIRCUIT HIGH?

Yes

- Replace the Integrated Power Module.
- Perform the BODY VERIFICATION TEST - VER 1.Body Verification Test

No

- Test complete.
- Perform the BODY VERIFICATION TEST - VER 1.Body Verification Test