U1415

U1415-IMPLAUSIBLE/MISSING VEHICLE CONFIGURATION DATA

For a complete wiring diagram Consult Diagrams/Electrical.

- When Monitored:
With the ignition on. The ORC on board diagnostics loads the ORC Configuration Data from the Totally Integrated Power Module (TIPM) CAN Bus message.

- Set Condition:
This DTC will set if the CAN Bus message was received but the information is invalid or corrupt.





Diagnostic Test

1. TOTALLY INTEGRATED POWER MODULE FAILURE
Turn the ignition on.
With the scan tool, read TIPM DTCs.

NOTE: Check connectors - Clean and repair as necessary.



Yes

- Repair all TIPM active DTCs and before diagnosing the ORC DTCs.

No

- Replace the Totally Integrated Power Module (TIPM).
- Perform *ORC VERIFICATION TEST - VER 1.Occupant Restraint Controller (ORC) Verification Test