Radiator Fan - Installation

2.0L/2.4L ENGINE





1. Install the radiator fan into position on the radiator.




2. Hand start all radiator fan fasteners.
3. Tighten all radiator fan retaining screws (1 and 2) to 6 Nm (55 in. lbs.).




4. Connect radiator fan electrical connector (1).
5. Lower vehicle.




6. Turbocharger equipped vehicles: Inspect radiator inlet neck O-ring. Replace if necessary. Install radiator inlet neck (2). Torque fasteners to 6 Nm (55 in. lbs.).




7. Connect the upper radiator hose to radiator. Align hose and position clamp so it will not interfere with the engine or the hood.
8. Install upper radiator closure panel (1) and center brace (2)Installation.
9. Install grille Grille - Installation.
10. Install battery tray and battery.
11. Connect cables to battery.
12. Fill cooling system.