Fuel Injector - Removal

2.4L





WARNING: Release fuel system pressure before servicing fuel system components. Service vehicles in well ventilated areas and avoid ignition sources. Never smoke while servicing the vehicle. This may result in personal injury or death.

1. Release fuel system pressure, Service and Repair.
2. Remove the air cleaner lid, disconnect the inlet air temperature sensor and makeup air hose.
3. Remove the negative battery cable.
4. Remove the engine cover or throttle control shield if equipped.

NOTE: Wrap shop towels around hose to catch any gasoline spillage.

5. Disconnect fuel supply tube from rail.
6. Remove the Intake Manifold, Intake Manifold - Removal.
7. Disconnect electrical connectors from fuel injectors.
8. Remove bolts holding fuel rail.
9. Remove the fuel rail and injectors.
10. Remove injectors from the fuel rail.