Stop Lamp Inhibit Relay - Description

DESCRIPTION

Vehicles equipped with an optional Electronic Stability Program (ESP)/Traction Control System (TCS) package have a stop lamp inhibit relay. The relay is contained within a small, rectangular, molded plastic housing and is connected to all of the required inputs and outputs through four integral male spade-type terminals that extend from the relay base plate.

The stop lamp inhibit relay is located in the Junction Block (JB) in the passenger compartment on the driver side cowl side inner panel below the end of the instrument panel.

The stop lamp inhibit relay cannot be adjusted or repaired and, if ineffective or damaged, the unit must be replaced.