Grille - Installation

INSTALLATION






CAUTION: Do not use a hammer or mallet to install the upper radiator shroud push pins, due to potential damage to the grille.

NOTE: Aspen grille shown, Durango grille similar.

1. Install the grille (3).
2. Install the four screws (2) and tighten to 13 Nm (10 ft. lbs.).
3. Install the upper four screws (1) and tighten to 13 Nm (10 ft. lbs.).
4. Install the upper radiator shroud and install the push pin fasteners.
5. Install the front fascia. Front Bumper Fascia - Installation