Fog Lamp - Removal

LAMP





1. Disconnect and isolate the battery negative cable. On vehicles equipped with the optional Hybrid Electric Vehicle (HEV) system, a technician trained in proper HEV service safety procedures must also remove the high voltage service disconnect from the high voltage battery pack.
2. Remove the fasteners that secure the front of the front fender wheel house liner to the bottom of the front fascia. Front Fender - Removal.
3. Pull the front of the front fender liner rearward far enough to access the back of the front fascia.
4. Reach under and behind the front fascia to access the front fog lamp housing on the back of the front bumper support.
5. Disconnect the wire harness connector (4) from the fog lamp bulb connector receptacle (1).
6. Remove the two screws (3) that secure the lamp to the back of the fascia.
7. Remove the lamp from the seat in the face of the front fascia.