Front Lamp Unit - Installation

FRONT LAMP UNIT





1. Reconnect the turn signal, marker lamp, headlamp and High Intensity Discharge Lamp (HID) connectors.
2. Install the front lamp assembly into its mounting location.
3. Install the three retaining screws (1) into the front lamp assembly.





4. Position the front lamp/fascia support bracket and install the 4 retaining bolts (3).
5. Close the hood and align the headlamp unit for proper fit to hood and fender. If necessary slightly loosen the headlamp mounting bolts and the fascia support bracket for proper fit and finish.
6. Check headlamp aiming after installation of the headlamp unit. Adjustments.
7. Install the front fascia.Front Bumper Fascia - Installation.