B1BBD

B1BBD-OCM CURRENT CONFIGURATION TABLE UNPROGRAMMED



- When Monitored:
If the Configuration Table is not programmed at the supplier or when the checksum is invalid.

- Set Condition:
This DTC will set if the module was received unprogrammed from the supplier, the vehicle line was not identified correctly or if the flash procedure was not completed successfully





MODULE CONFIGURATION

Does the scan tool display B1BBD-OCM CURRENT CONFIGURATION TABLE UNPROGRAMMED?

Yes
Perform the B1BA7-OCS VERIFICATION REQUIRED diagnostic procedure. B1BA7.
No

- Replace the Occupant Classification Module. WARNING: If the Occupant Restraint Controller (ORC) is dropped at any time, it must be replaced. Failure to follow these instructions may result in possible serious or fatal injury.

- With the scan tool, perform the OCCUPANT CLASSIFICATION MODULE SYSTEM VERIFICATION TEST. Occupant Classification Module (OCM) System Verification Test.