B2325

B2325-HEADLAMP WASHER MOTOR CONTROL CIRCUIT OPEN



- When Monitored:
With the ignition on.

- Set Condition:
When the Totally Integrated Power Module (TIPM) detects a short/high condition.





INTEGRATED POWER MODULE
1. Turn the ignition off.
2. Replace the Wiper ON/OFF relay with a known good relay.
3. With the scan tool, clear all TIPM DTCs.
4. Turn the Wipers ON then OFF.
5. With the scan tool, read the Wiper DTCs.

Does the scan tool read: B2325-WIPER ON/OFF CONTROL CIRCUIT HIGH?

Yes

- Replace the Integrated Power Module.
- Perform the BODY VERIFICATION TEST. Body Verification Test.

No

- Test complete.
- Perform the BODY VERIFICATION TEST. Body Verification Test.