Heated Seat Switch - Installation

INSTALLATION






NOTE: There are different instrument panel switch pods available based on the option content of the vehicle. Ensure the switch pod being installed matches the vehicle options.

1. Position the accessory switch bezel (2) onto the back of the instrument panel center bezel (3).
2. Install the two screws (1) that secure the accessory switch bezel to center bezel. Tighten the screws to 2 Nm (17 in. lbs.).
3. Install the center bezel onto the instrument panel Instrument Panel Bezel - Installation.
4. Reconnect the negative battery cable.
5. Verify heated seat system operation.