Crankshaft Main Bearing

MAIN BEARING





1. Install and tighten bolts (1-10) in sequence shown to 41 Nm (30 ft. lbs.).
2. Tighten bolts (1-10) again to 41 Nm (30 ft. lbs.) in sequence shown.
3. Install main bearing bed plate to engine block bolts (11-20), and torque each bolt to 28 Nm (250 in. lbs.) in sequence shown.
4. Tighten bolts (1-10) to 75 Nm (55 ft. lbs.) in sequence shown.
5. Tighten bolts (11-20) again to 28 Nm (250 in. lbs.) in sequence shown.





End Play 0.09 - 0.24 mm (0.0035 - 0.0094 in.)
Wear Limit 0.38 mm (0.015 in.)
Main Bearing Diametrical Clearance 0.018 - 0.062 mm (0.0007 - 0.0024 in.)