Grille - Installation

CHRYSLER





1. Position the grille/bumper fascia (1) on vehicle.





2. Reconnect the electrical wiring harness (1), if equipped at the front rail support.





3. Reconnect fog lamp wire connectors (2), if necessary.





4. Install the two bolts (4) and two push pins (3) attaching fascia to the upper core support. Tighten the bolts to 5.5 Nm (49 in.lbs.).
5. Install the bolts attaching the front fascia to fender (5). Tighten the bolts to 5.5 Nm (49 in.lbs.).
6. Install the front wheelhouse splash shields fasteners (6 AND 7). Splash Shield - Installation.





7. Install the push pins (1) attaching the fascia (3) to the lower support (2).
8. Lower the vehicle.