First Row

INSTALLATION

NOTE: Left seat shown in illustrations. Right seat similar.






NOTE: Outboard side of power seat shown. Inboard side and manual seat similar.

1. Position the seat back and seat back hinges (1) to the seat track (3) as an assembly.
2. Install the two bolts (2) that secure each seat back hinge to the seat track. Tighten the bolts to 48 Nm (35 ft. lbs.).





3. If equipped with heated seats, connect the seat back wire harness connector.
4. If equipped with power recliner, connect the power recliner motor wire harness connector.
5. Reposition the seat bottom closeout (2) to the seat back frame (3) and engage the J-hooks (1) that secure the closeout to the frame.
6. Install the seat back panel Seat Back Panel - Installation.
7. Install the inboard seat cushion side shield Seat Cushion Side Shields - Installation.
8. Install the seat into the vehicle Seat - Installation.