First Row

REMOVAL

WARNING: Disable the airbag system before attempting any component diagnosis or service of the front seats, when equipped with front seat air bags. Disconnect and isolate the negative battery (ground) cable, then wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to take the proper precautions may result in accidental airbag deployment and possible serious or fatal injury.

NOTE: Left seat shown in illustrations. Right seat similar.





1. Remove the seat from the vehicle and place it on a workbench Seat - Removal.
2. Remove the seat back cover and cushion (1) from the seat back frame (2) Outer Trim Ring Panel - Removal.
3. Remove the armrest bracket (3) from the seat back frame.
4. Remove the lumbar support and handle mechanism (4) from the seat back frame Front Lumbar Support - Removal.