Second And Third Row, Quad

INSTALLATION

1. Place seat cushion cover in position on seat cushion.
2. Engage J-strap retainers to hold seat cover to cushion.
3. Place seat cushion in position on seat.
4. Connect wire connectors, if equipment.
5. Install bolts attaching seat cushion to seat riser. Tighten bolts to 40 Nm (29.5 ft. lbs.) torque.
6. If equipped, close storage bin.
7. Install seat track rear cover (if equipped).
8. Install the quad seat side shield and cup holder if equipped. Seat Riser Latch Link - Installation and Seat Riser Latch Link - Installation
9. Install seat cushion side covers. Seat Cushion Side Shields - Installation