Quarter Trim Panel

INSTALLATION





1. Position the left quarter trim panel (5) into the vehicle.
2. Left quarter trim only - Connect the auxiliary power outlet and power inverter (2) wire harness connectors (3) (if equipped).
3. Align the trim panel over the retaining slots on the inner quarter panel (1) and firmly snap into place.
4. Install the six quarter trim retaining screws.
5. Right quarter trim only - install the second row seat belt webbing anchor bolt.
6. Install the third row upper turning loop anchor bolt.
7. Install the third row lower seat belt webbing anchor (4).
8. Install the quarter trim bolster.
9. Install the upper D-pillar trim. D-Pillar Trim Panel - Installation.
10. Install the liftgate scuff plate. Scuff Plate - Installation.
11. Close liftgate.