First Row

INSTALLATION

NOTE: Head restraint sleeves are not interchangeable. The sleeve with adjustment lock button is positioned on the inboard side of the seat.






NOTE: Illustration shown with seat back cover and foam removed for clarity.

1. Push the head restraint sleeves (1 and 3) downward until the retaining tabs (2) and retaining barbs (5 and 6) are fully engaged to the seat back frame (4).
2. Reposition the top of the seat back cushion cover and engage the J-hook that secures the cover to the frame Outer Trim Ring Panel - Installation.
3. Install the plastic seat back cover Seat Back Cover - Installation.
4. Install the head restraint Headrest - Installation.
5. Reconnect the negative battery cable.