Seat - Installation

INSTALLATION

NOTE: See Power Seats, Third Row, for service of the power folding seat module, motors, actuator, latches and switches.





1. Position the third row seat into the vehicle.
2. Connect the electrical connectors.
3. Install the bolts (1) that secure the four hinges to the floor panel. Tighten the bolts in the sequence shown to 89 Nm (66 ft. lbs.).





4. Fold the third row seat into the floor well.
5. Install the bolts (1) that secure the seat to the floor panel. Tighten the bolts to 58 Nm (43 ft. lbs.).
6. Using an appropriate scan tool, recalibrate the seats as required and verify proper seat operation Programming and Relearning.