Leg Latch Actuator Position Switch

INSTALLATION





1. Position the switch (1) onto the seat leg assembly (3). Ensure the alignment stud is in the hole on the leg assembly and that the rivet hole is aligned.
2. Install the retaining rivet (2).
3. Install the tie strap holding the switch wire harness and leg latch release cable (5) to the seat leg assembly.





4. Connect the switch electrical connector (1).
5. Install the seat cushion and cover assembly, Seat Cushion Cover - Installation.
6. Install the third row power folding seat, Seat - Installation.
7. Perform the third row power folding seat recliner calibration, Programming and Relearning. Verify proper seat operation.