Third Row - Seat Recliner Switch

INSTALLATION






NOTE: The procedure for replacing the seat recliner switch is the same for both the 60 and 40 third row power folding seats. The following steps should be performed only on the seat with the inoperative seat recliner switch.

1. Insert the switch (3) into the switch retaining cover (2).
2. Connect electrical connector.
3. Install the switch and retaining cover assembly into the seat cover.
a. Slide the switch and retaining cover assembly (2 AND 3) into the two holding tabs (4) of the switch retainer sewn into the seat cover (1).
b. Push the switch and retaining cover assembly (2 AND 3) down until the retaining tabs (5) are fully engaged.
4. Install the seat cushion and cover assembly, Seat Cushion Cover - Installation.
5. Install the third row power folding seat, Seat - Installation.
6. Perform the third row power folding seat recliner calibration, Programming and Relearning. Verify proper seat operation.