Transponder ID Mismatch

Tests 1 - 5:

Tests 6 - 7:

SYMPTOM
TRANSPONDER ID MISMATCH

TEST NOTE
All symptoms listed above are diagnosed using the same tests. The title for the tests will be TRANSPONDER COMMUNICATION FAILURE.

WHEN MONITORED
At ignition ON and during Key Programming Mode.

SET CONDITION
When the transponder ID read by the SKIM does not match any of the transponder ID's stored in the SKIM's memory.

POSSIBLE CAUSES
- Checking multiple key operation
- SKIM
- Intermittent wiring harness problem
- Replace ignition key