Antenna Body & Cable Replacement

Negative Battery Cable Remote Terminal:

REMOVAL
1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
2. Inside trunk, pull passenger side trunk liner aside.
3. Unplug antenna lead from base of antenna mast.
4. Remove antenna mast by unscrewing mast from antenna body.
5. Remove screw from mounting bracket.
6. Pull antenna body down through the rubber grommet.

INSTALLATION
1. Push antenna body up through the rubber grommet in the quarter panel.
2. Install the screw to the mounting bracket.
3. Install the antenna mast by screwing mast to antenna body.
4. Plug antenna lead into the antenna base.
5. Install the passenger side trunk liner.
6. Connect the negative battery cable remote terminal to the remote battery post.