Rear Seat Back Cover

REAR SEAT BACK COVER

REMOVAL

1. Remove rear seat back.
2. Pull cover over edges of the foam.
3. Cut hog rings to free cover.
4. Remove rear seat back cover from seat back.

INSTALLATION

1. Position seat back cover on seat back.
2. Install hog ring on right side listing pocket of cover to foam, starting in the middle and lining up the die cuts in the listing pocket with the hog ring windows in the foam (three places).
3. Repeat for the left side listing pocket of cover.
4. Place cover seams in salvage trenches of foam.
5. Roll corners and edges of cover over foam.
6. Flip seat over making sure cover is pulled up over frame on all corners. Push top, bottom, inside, outside, corners of the foam into the cover and engage J-strap retainers.
7. Install rear seat back.