Programming and Relearning

The MHSMM interfaces with the RKE vial the Programmable Communication Interface (PCI) bus. The proper procedure of setting and recalling a memory position using the RKE is as follows:
1. Press memory switch 1 and release to recall memory position 1.
2. Adjust the seat, recliner and side view mirrors to the desired position.
3. Press momentarily and release memory switch S.
4. Press momentarily and release memory switch 1 or 2.
5. Press and release the UNLOCK button on one of the RKE transmitters. Do NOT press any switch for 10 seconds.
6. Set radio station presets.

To program the second driver's position, repeat the above procedure using memory switch 2. The second RKE transmitter can be programmed in the fashion.

To recall either of the programmed positions momentarily press and release either memory selector switch 1 or 2. If using RKE, just press and release the UNLOCK button on the proper transmitter for either position 1 or 2.

A recall is possible any time the vehicle transmission is in PARK. This condition is monitored by the Body Control Module (BCM).

NOTE: The module will abort a recall if the transmission is moved out of park or if any seat movement is activated whether manually or by memory recall.