Brake Rotor - Removal and Installation

REMOVAL - BRAKE ROTOR (FRONT)
1. Remove disc brake caliper and store (hang) it out of the way following the procedure found in Brake Pads/Shoes.
2. Remove any clips retaining the brake rotor to the wheel mounting studs.





3. Remove brake rotor from hub by pulling it straight off wheel mounting studs.

REMOVAL - BRAKE ROTOR (REAR)
1. Remove disc brake caliper and store (hang) it out of the way following the procedure found in Brake Pads/Shoes.
2. Remove any clips retaining the brake rotor to the wheel mounting studs.





3. Remove the rear rotor from hub by pulling it straight off the wheel mounting studs .

INSTALLATION - BRAKE ROTOR (FRONT)
1. Install brake rotor over the wheel mounting studs onto hub.
2. Install disc brake caliper and shoes following the procedure found in Brake Pads/Shoes.
3. Pump the brake pedal several times to ensure the vehicle has a firm brake pedal to adequately stop vehicle.
4. Check and adjust brake fluid level as necessary.

INSTALLATION - BRAKE ROTOR (REAR)
1. Install brake rotor over the wheel mounting studs onto hub.
2. Install disc brake caliper and shoes following the procedure found in Brake Pads/Shoes.
3. Adjust parking brake shoes as necessary.
4. Pump the brake pedal several times to ensure the vehicle has a firm brake pedal to adequately stop vehicle.
5. Check and adjust brake fluid level as necessary.