Harmonic Balancer - Crankshaft Pulley: Service and Repair

REMOVAL
1. Disconnect negative cable at right strut tower.
2. Remove upper radiator crossmember.
3. Remove radiator fan.
4. Remove the accessory drive belts.





5. Use Special Tool 8191 to hold crankshaft damper while removing center bolt (Fig. 96).





6. Use Special Tool 1023 puller, and insert C-4685-C2, remove crankshaft damper (Fig. 97).

INSTALLATION





1. Install crankshaft damper using Special Tools C-4685-C1 (5.9 inch) Bolt, with Nut and Thrust Bearing from 6792, and 6792-1 Installer (Fig. 98). Install center bolt and tighten to 115 Nm (85 ft. lbs.) (Fig. 96).
2. Install accessory drive belts.
3. Install radiator fan.
4. Install upper radiator crossmember.
5. Connect negative cable.