Operation CHARM: Car repair manuals for everyone.

Checking Engine Oil Pressure

DIAGNOSIS AND TESTING - ENGINE OIL PRESSURE
1. Remove the oil pressure switch.
2. Install oil pressure test gauge assembly, Special Tools C-3292 with 8406 adapter.
3. Start engine and monitor gauge readings.

CAUTION: If oil pressure is 0 at idle, Do Not Run engine at 3000 RPM.

4. Oil Pressure (engine at operating temperature): Curb Idle 34.5 kPa (5 psi) minimum 3000 RPM 300 - 724 kPa (45 - 105 psi).
5. If oil pressure is 0 at idle, shut off engine, check for pressure relief valve stuck open or a clogged oil pickup screen.
6. Install oil pressure switch after testing is completed.