5 Passenger Vehicles

REMOVAL

Fig. 1 Negative Battery Cable Remote Terminal:

1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post (Fig.1).
2. Remove ash receiver (if applicable).
3. Using a trim stick (special tool # C-4755), gently pry out on center trim bezel.Disconnect wiring connectors to HVAC controls, cigar lighter/auxiliary power outlet and traction control switch (if equipped).
4. Remove instrument panel center trim bezel.
5. Remove two retaining screws to the storage bin and remove.

INSTALLATION
1. Install the two retaining screws to the storage bin.
2. Install the instrument panel center trim bezel.
3. Connect wiring connectors to HVAC controls, cigar lighter/auxiliary power outlet and traction control switch (if equipped).
4. Firmly snap the center trim bezel into place.
5. Install the ash receiver (if applicable).
6. Connect the negative battery cable remote terminal to the remote battery post (Fig.1).