Fog Lamp Unit Replacement

REMOVAL
1. Open hood, disconnect and isolate the battery negative cable.

Fig.17 Fog Lamp:

2. Remove screw(s) attaching fog lamp to fascia.
3. Pull fog lamp forward from opening in front bumper fascia.
4. Disconnect fog lamp wire connector from front lighting wire harness.
5. Remove fog lamp from vehicle.

INSTALLATION
1. Connect fog lamp wire connector to front lighting wire harness.
2. Insert fog lamp rearward into opening in front bumper fascia.
3. Install screw(s) attaching fog lamp to fascia.
4. Connect the battery negative cable and close hood.
5. Verify fog lamp operation and alignment. Refer to Electrical, Exterior Lamps/Lighting, Fog Lamp, Adjustments.