Front Door Window Glass: Service and Repair

DOOR GLASS

REMOVAL

1. Remove flag cover, door trim panel, water shield as necessary, and pull cup support bracket.
2. Connect power window switch and lower window 150 mm (6 in.) from full up position.
3. Loosen nuts attaching regulator roller channel to glass and lift plates.

Fig. 3:

4. Slide roller channel rearward to allow lift plate nuts to pass through key hole slots in channel (Fig. 3).
5. Remove glass from roller channel.
6. Raise glass upward and out of the opening at top of door.

INSTALLATION

1. Lower glass into opening at top of door.
2. Place glass in position against roller channel.
3. Insert lift plate nuts into key hole slots in roller channel and slide channel forward to locked position.
4. Tighten nuts to attach regulator roller channel to glass and lift plates.
5. Install pull cup support bracket, water shield , door trim panel, and flag cover.