Top Frame Cam

TOP FRAME CAM

Fig. 2:

The top frame cam changes forward or rearward position of the top header in relation to the windshield header. The cam turns inside the rear side rail and thrust link (Fig. 2). It may be necessary to lengthen the balance links 1 or 2 serrations after a cam adjustment. The position of the cam high side determines the angle between the center and rear side rails. When the high side is fully forward, the angle is at a minimum, and when turned rearward, the angle is increased. An increased angle increases the forward movement of the top. The cam high side is indicated by a arrow on the cam threaded end.

TO ADJUST CAM SETTING

1. Lower top to half down position to remove all possible strain from the cam.
2. Remove Torx head screw.
3. Using appropriate Torx bit, rotate cam as necessary and secure set screw.
Tighten Torx bit screw to 5.2 to 7.2 N.m (43 to 67 in.lbs.) torque.