Front Seat Cushion Cover

FRONT SEAT CUSHION COVER

REMOVAL - FRONT SEAT CUSHION COVER

NOTE: Fabric covered cushions are serviced as an assembly.

1. Remove seat from vehicle.
2. Remove front seat cushion side shields and disconnect wire connectors, if equipped.
3. Remove seat back.
4. Remove seat cushion bolts.

Fig. 21:

5. Disconnect wire harness fasteners from cushion pan. (Fig. 21).

Fig. 23:

6. Disengage J-strap attaching seat cover from the seat cushion frame (Fig. 23).

Fig. 24:

7. Pull cover off to the hog rings (Fig. 24).
8. Cut hog rings attaching seat cover seat cushion.
9. Remove seat cushion cover from seat cushion.

INSTALLATION - FRONT SEAT CUSHION COVER

NOTE: Fabric covered cushions are serviced as an assembly.

1. Position seat cover on cushion.

Fig. 25:

2. Align seat cover with cushion alignment indentations (Fig. 25).
3. Install hog rings.
4. Engage J-strap attaching seat cover to front of seat cushion frame.
5. Install wire harness fasteners to cushion pan.
6. Install seat cushion bolts.
7. Install seat back. Tighten recliner bolts to 12 N.m (9 ft.lbs.) torque. Tighten pivot bolts to 40 N.m (30 ft.lbs.) torque.
8. Connect switch wire connectors to the cushion side shield, if equipped.
9. Install cushion side shields.
10. Install seat in vehicle.