Fog Lamp Replacement

REMOVAL
1. Disconnect and isolate battery negative cable.
2. Remove fog lamp unit. (Refer to LAMPS/LIGHTING - EXTERIOR/FOG LAMP UNIT - REMOVAL).
3. Disconnect wire connector from back of fog lamp.
4. Rotate bulb base counterclockwise one quarter turn.
5. Pull bulb from back of lamp.

INSTALLATION
1. Install bulb and twist clockwise.
2. Connect the fog lamp harness connector.
3. Install foglamp unit. (Refer to LAMPS/LIGHTING - EXTERIOR/FOG LAMP UNIT - INSTALLATION).
4. Connect battery negative cable.