Vehicle Damage Warnings

INDIVIDUAL COMPONENT SERVICE

WARNING:
- The SRS components should not be subjected to heat over 93 °C (200 °F), so remove the SRS-ECU, air bag modules (driver's side and front passenger's side), clock spring, before drying or baking the vehicle after painting. Recheck the SRS system operability after reinstalling them. (Refer to SRS Maintenance.)
- If the SRS components are removed for the purpose of checking, sheet metal repair, painting, etc., they should be stored in a clean, dry place until they are reinstalled.

If the SRS components are to be removed or replaced as a result of maintenance, diagnosis, etc., follow the appropriate procedure. (SRS Air Bag Control Unit: Air Bag Modules and Clock Spring.)