Disassembly and Assembly
Disassembly And Assembly:
DISASSEMBLY SERVICE POINTS
<>ARMATURE AND BALL REMOVAL
CAUTION: When removing the armature, take care not to lose the ball (which Is used as a bearing) in the armature end.
<>SNAP RING AND STOP RING REMOVAL
1. Press a long socket wrench of appropriate size to the stop ring. Then tap the socket wrench to remove the stop ring to the pinion gear side.
2. After removing the snap ring (by using snap-ring pliers), remove the stop ring and the overrunning clutch.
ASSEMBLY SERVICE POINT
>>A<
1. Using a suitable pulling tool, pull the overrunning clutch stop ring over the snap ring.