Suspension: Service and Repair

REAR SUSPENSION ASSEMBLY





REMOVAL AND INSTALLATION





CAUTION: Indicates parts which should be temporarily tightened, and then fully tightened with the vehicle on the ground in the unladen condition.

Removal Service Points
<> Brake Caliper Assembly Removal
Secure the removed caliper assembly with a wire, so that it does not fall.

<> Crossmember Mounting Nut Removal

Support the crossmember with a garage jack or transmission jack to remove the crossmember mounting nut.

Installation Service Point
>>A<< Stopper B/Stopper A Installation

1. Install stopper B in the shown direction.
2. Install stopper A in the shown direction while checking that the notches on stopper A are engaged with the projections on the trailing arm bushing.

INSPECTION
Check crossmember for cracks or other damage.