Rearview Mirror

REAR VIEW MIRROR

REMOVAL

1. Remove screws attaching inside rear view mirror to header panel.
2. Disconnect wire connector to rear view mirror, if so equipped.

Fig. 23:

3. Remove rear view mirror from vehicle (Fig. 23)

REMOVAL - JR-27 (Convertible) ONLY

All vehicles with driver and passenger side airbags must have a colored coded five Bullet point airbag warning label applied to the sun visor, verify label availability and ensure the label is installed.

1. Disengage sun visor from sun visor support.
2. Remove screws attaching sun visor to header panel.
3. Disconnect lighted vanity mirror wiring.

Fig. 24:

4. Remove sun visor from vehicle (Fig. 24).

INSTALLATION

1. Position inside rear view mirror to vehicle.
2. Connect wire connector to rear view mirror, if so equipped.
3. Install screws attaching rear view mirror to header panel.

INSTALLATION - JR-27 (Convertible) ONLY

All vehicles with driver and passenger side airbags must have a colored coded five Bullet point airbag warning label applied to the sun visor, verify label availability and ensure the label is installed.

1. Position sun visor to vehicle.
2. Connect lighted vanity mirror wire connector.
3. Install screws attaching sun visor to header panel.
4. Engage sun visor to sun visor support.