Front Seat Cushion

FRONT SEAT CUSHION

REMOVAL - FRONT

1. Remove seat from vehicle.
2. Remove front seat cushion side shields and disconnect wire connectors, if equipped.
3. Remove seat back.
4. Remove seat cushion bolts.

Fig. 21:

5. Disconnect wire harness fasteners from cushion frame (Fig. 21).

Fig. 22:

6. Remove seat cushion (Fig. 22).

INSTALLATION - FRONT

1. Install wire harness fasteners to cushion frame.
2. Install seat cushion bolts.
3. Install seat back. Tighten recliner bolts to 12 N.m (9 ft.lbs.) torque. Tighten pivot bolts to 40 N.m (30 ft.lbs.) torque.
4. Connect switch wire connectors to the cushion side shield, if equipped.
5. Install cushion side shields.
6. Install seat in vehicle.