Door

DOOR

REMOVAL

1. Open and support door on a suitable lifting device.
2. Mark hinges attachment locations with a grease pencil or other suitable device to aid installation.
3. Disengage wire connector at hinge A-pillar.

Fig. 2:

4. Remove bolts attaching door check strap to hinge A-pillar (Fig. 2).
5. Remove the nuts attaching the door to the door hinges and remove the door from the vehicle.

INSTALLATION

1. Position door onto the door hinges and install the nuts.
2. Install bolts attaching door check strap to hinge pillar.
3. Connect wire connector at hinge pillar.
4. Verify door fit and operation. Adjust the door for flushness and parallel gaps as necessary.