Rear View Mirror Replacement

REMOVAL
Ambient Temperature Sensor
(Refer to ELECTRICAL/CHARGING/BATTERY TEMPERATURE SENSOR - REMOVAL) for service procedures.

Compass
This module must not be removed separately from the EMTM.

Electrochromic Mini-trip Mirror (EMTM) Module
1. Disconnect and isolate the battery negative cable.
2. Disconnect wire harness connector.
3. Remove the mounting screws that attach the mirror to the windshield frame header.

INSTALLATION
Electrochromic Mini-trip Mirror (EMTM) Module
1. Install the mounting screws that attach the mirror to the windshield frame header.
2. Connect the wire harness connector.
3. Connect the battery negative cable and verify operation of the EMTM and compass.