Oil Change Reminder Lamp: Service and Repair

1. Move the ignition switch to the RUN position (3).





2. Within 4 seconds of moving the ignition switch into the RUN position, press the reset button for the trip odometer 3 twice within one second. The display for the FSS service request 1 is activated for 10 seconds.





3. During the 1O seconds the FSS service request is displayed, move the ignition switch to the OFF position 1. The FSS service request will continue to be displayed.





4. Press the reset button 3 for the trip odometer 1 and hold.





5. Move the ignition switch to the RUN position 3.





6. Continue to press and hold the reset button for the trip odometer ,about 10 seconds, until the audible signal sounds and the new start distance appears 1 in the display. The tool symbol 2 should disappear at this time.