Removal

REMOVAL








1. Pull upward at forward edge of cushion each retainer loop of the rear seat cushion to disengage retainer loops from cups in floor.

2. Remove rear seat cushion (4) from vehicle.





3. Disengage the J-straps attaching seat cover to the cushion.





4. Fold rear of the seat cover forward to uncover hog rings.





5. Start on the rear side of the cushion and cut hog rings.





6. Cut the hog rings on the outer side of the cushion.





7. Work around the outer edges and cut the hog rings.





8. Fold cover up to access the inner hog rings and cut them.

9. Repeat operation on the other side of cushion.

10. Remove seat cushion cover from seat cushion.





11. If replacing cushion, remove the cushion support by cutting the hog rings attaching it to the foam and remove.