Installation

INSTALLATION





NOTE: LHD model shown. RHD model similar.

1. Position the passenger side instrument panel duct and demister duct assembly (4) into the instrument panel.

2. Install the passenger side instrument panel duct and demister duct assembly onto the outlets of the instrument panel. Make sure that the ducts are correctly installed over the instrument panel and demister outlet seals.

3. Install the four screws that secure the passenger side instrument panel duct and demister duct assembly to the instrument panel. Tighten the screws to 2.2 Nm (20 in. lbs.).

4. Position the driver side instrument panel duct and demister duct assembly (3) into the instrument panel.

5. Install the driver side instrument panel duct and demister duct assembly onto the outlets of the instrument panel. Make sure that the ducts are correctly installed over the instrument panel and demister outlet seals.

6. Install the four screws that secure the driver side instrument panel duct and demister duct assembly to the instrument panel. Tighten the screws to 2.2 Nm (20 in. lbs.).

7. Install the screw that secures the instrument panel top pad (1) to the reinforcement bracket (2). Tighten the screw to 2.2 Nm (20 in. lbs.).

8. Install the instrument panel.