Installation

INSTALLATION - 300C AND MAGNUM





1. Position the headlamp unit in the opening in the headlamp mounting cross-member.

2. Connect the electrical connector.





3. Install the one lower headlamp unit retaining screw.

NOTE: If the fascia was loosened, reattach it.





4. Install the two upper retaining screws (1).

5. Connect the battery negative cable.

INSTALLATION - CHARGER





1. Position the headlamp unit in the opening in the headlamp mounting cross-member.

2. Connect the electrical connector.





3. Install the one lower headlamp unit retaining screw.





4. Install the two upper retaining screws (1).





5. Install front fascia.

6. Connect the battery negative cable.