Operation CHARM: Car repair manuals for everyone.

Installation






INSTALLATION

FRONT IMPACT SENSOR





1. Position the front impact sensor in the correct mounting location and install the two mounting screws (2). Torque screws (2) to 7 Nm (62 in. lbs.).

2. Connect the electrical connector (3).

NOTE: If replacing the left front impact sensor, the air intake system needs to be installed.

WARNING: Do not connect the battery negative cable. Personal injury or death may result if the system test is not performed first.

SIDE IMPACT SENSOR

B-PILLAR MOUNTED SIDE IMPACT SENSOR





1. Position the B-pillar mounted impact sensor in the correct mounting location and install the two mounting screws (2). Torque screws (2) to 7 Nm (62 in. lbs.).

2. Connect the electrical connector (1).

3. Install the B-pillar trim panel.

WARNING: Do not connect the battery negative cable. Personal injury or death may result if the system test is not performed first.

C-PILLAR MOUNTED SIDE IMPACT SENSOR





4. Position the C-pillar mounted impact sensor in the correct mounting location and install the two mounting screws (2). Torque screws (2) to 7 Nm (62 in. lbs.).

5. Connect the electrical connector (3).

6. Install the C-pillar trim panel.

WARNING: Do not connect the battery negative cable. Personal injury or death may result if the system test is not performed first.