Left Side Module

LEFT SIDE MODULE




1. Install level sending card, make sure that the locking tabs are locked on the card.





2. Route wires in the proper location.





3. Install module top to module bottom.





4. Connect the electrical connectors for right side fuel level sending card, left side module card and fuel pump.





5. Install module and align marks on the module for proper orientation.





6. Install module lock-ring.

7. Use special tool #9340 to tighten left side module lock ring.

8. Connect the electrical connector to left side module and install plastic access cover.





9. Fold the foam pad covering access cover for modules back into place.





10. Install rear lower seat cushion.





11. Rear lower seat cushion installed.





12. Fill fuel tank.

13. Connect negative battery cable.

14. Fill fuel tank. Use the scan tool to pressurize the fuel system. Check for leaks.